Replacement PANASONIC Power Tool Battery, PANASONIC Drill Battery

PANASONIC Power Tool Battery Using Instructions:

• Most of the new Cordless Drill Battery at the factory are set to sleep mode, the first boot with only about 5% of the electricity. You should not use an external power supply at this time, let the battery exhausted, until shutdown, then switch on the external ac adapter and the first charge had better over 15 hours. After fully charged, you should charge after the exhaustion of batter, the time of the second and third charge should be more than 12 hours, in order to activate PANASONIC Power Tool Battery and lay a good foundation for future use.
• PANASONIC battery life is measured in terms of the number of charging and discharging. Do not enable the PANASONIC Drill Battery unless it is necessary, if you don't use the battery for a long time, you should charge it to about half full and place in a cool place to keep. If you enable the PANASONIC battery, you should run out of power after the charging, and do not plug in the AC power before exhausted. When the PANASONIC Power Tool Batteries fully charged, you should disconnect the AC input because overcharge will make the PANASONIC battery overheat and that will shorten the PANASONIC Drill Battery life.
• Generally speaking, nowadays the PANASONIC Cordless Drill are with intelligent battery protection, the PANASONIC Drill Battery will not be damaged due to normal operation, but still may damaged for the life-span of travelmate battery or other special reasons.
• Lithium-ion PANASONIC Power Tool Batteries should fast charge in constant current and then switch to slow charge in constant voltage when the voltage reaches a certain value. Usually the laptop doesn't have a strictly constant-current charge monitoring device. Charge current will turn small when system load large and vice versa, the current is decided by the PANASONIC AC adapter power margin, it is obviously.
• Discharge in a current as small as possible, the action is to slow down the CPU, stop the hard disk, adjust the screen to the most dark, and then do not run any programs until the laptop automatically shut down. The reason to emphasize the small current discharging is to prevent the PANASONIC Cordless Drill premature detect the Power Tool Battery voltage shortage.

Warranty & Guarantee

  Warranty Policy We warrant that the products sold in our website, other than explicitly stated, are 100% brand new and free from defects in material and workmanship - We never sell used or refurbished batteries

• 1 Year Warranty
• 15 Days Money Back

  Secure Shopping Guarantee Shopping with us is safe and secure. None of our customers have ever reported fraudulent use of their credit cards as a result of shopping with us. You can be assured that the information you give us is confidential. We do not sell, rent or share information of our customers with other parties.

Recently Hot Products

• acer travelmate 4000 battery
• compaq evo n800v battery
• compaq evo n160 battery
• compaq evo n1000v battery
• evo n800c battery
• Dell d600 battery
• Dell x200 battery
• Dell Inspiron 8100 Battery
• Dell d610 battery
• toshiba a70 battery
• satellite m30 battery
• toshiba satellite a10 battery
• aspire 3000 battery
• aspire 1640 battery
• acer aspire 5000 battery
• evo n1020v battery
• evo n1015v battery
• evo n1000c battery